TECHNICAL
DATA SHEET
POLYPROPYLENE
RECOMMENDED
3D PRINTE
PARAMETERS
Nozzel Temperature :
220 – 250 °C / 428 – 482 °F
Closed Chamber :
Yes
Bed Temeprature :
85 – 100 °C / 185 – 212 °F
Bed Material :
PP Tape or PP adhesive
Nozzle Diameter :
≥ 0,4 mm
Print Speed :
20 – 50 mm/s
Brim :
Yes, Min 5mm
Cooling Fan :
Yes (Off for the first 2 Layers)
Optional Settings :
- Layer Height 0.3 mm
Top Solid Layers : 3
Bottom Solid Layers : 2 - Layers Height 0.2 mm
Top Solid Layers : 4
Bottom Solid Layers : 3
PHYSICAL PROPERTIES
Density 0.90 g/cm3
Melting Point 136 °C / 276.8 °F
Color Natural
Diameter 1.75 ± 0.05 mm
Net Weight 800 gr
CHARACETERISTICS
Pros
| Cons
|
STORAGE
Put in dry place and avoid direct sunlight
NOTICE
The information contained in this sheet are based on our knowledge and experience. Therefore, KREAfil is not responsible for the use of the information.
The given data provided may change without prior notice.